Spec/Size

Antibacterial specifications
Approximately 10 times the water absorption (Dry weight ratio of this product)
The 60 micron fine three-dimensional structure of the PVA sponge material absorbs water rapidly, absorbing approximately 160 mL of water at once
It drains water well, so the more you squeeze it, the more absorbent it recovers
Repeated “wiping squeezing” will not reduce water absorption
Can be used to wipe off water droplets around the house, such as splashes around the sink, water droplets in the bathroom, and condensation on window glass
Can also be used to absorb drinks spilled on carpets and floors, dirt and stains
Can also be used to absorb drink stains

[How to use]
When using for the first time, wash thoroughly with water and squeeze before use
It will become hard when it dries. Soak in water or lukewarm water to soften it before use.
Soak in water, wring it out well, and then slowly slide the sponge to wipe off water droplets and condensation.
If you squeeze it, the absorbent will recover, so repeat “wiping squeezing”.
When absorbing spilled water, dirt, stains, etc. on a carpet, hold the sponge with your hand for a few seconds and slowly release it.
*For heavy dirt or dry dirt, repeat the above steps or dissolve the dirt with mild detergent and lukewarm water before absorbing it.
*If it gets dirty, wash it thoroughly with mild detergent.
You can cut it to the size and shape you like depending on the usage scene.
*After wetting it with water and squeezing it, cut it while it is soft.
*When cutting, be careful not to cut your fingers.

[Water absorption capacity (approx.)]
160mL

[Size (approx.)]
Width 11 x Depth 6.5 x Height 2.8 cm (when wet)

[Material]
PVA sponge

[Heat resistance temperature]
60

[Handling precautions]
The isothiazolinone preservative contained in this product may cause allergic contact dermatitis. Be sure to wash it thoroughly with water before using it for the first time.
Condensation may occur inside the packaging film, but this does not affect the quality.
Due to the nature of the product, the sponge may have dents or other marks, but this does not affect the quality or functionality.
Leaving it dirty can cause mold and other issues. Wash thoroughly after use and wring it out before storing.
If it is very dirty, use soap or a neutral detergent.
When using bleach, be sure to use it in accordance with the bleach usage conditions.
*(Example of use: Dilute 5ml of chlorine bleach per 1L of water, soak for about 2 minutes, then rinse thoroughly with water.) If the bleach is used at a concentration higher than the specified concentration, soaked for longer than the specified amount, or rinsed insufficiently, the material will deteriorate and the color will fade.
Do not place in boiling water, in a high temperature location, or in direct sunlight.